Consideration! Fuel Dispenser Repaired

With the development of fuel dispenser producers in china, it truly is difficult to avoid fixing it. Usually speaking, if there is certainly something incorrect with censtar Fuel Dispenser, it is going to present in the following aspect:

1. Accumulative figures transition seems.

2. Right after shift electricity, show panel on the fuel dispenser will not show.

three. It'll show malfunction 3112 and so on. This type of malfunction is attributable to tax-control information, or possibly other factors. The only method to solve the issue is usually to change an additional new principal board, and the major board which can be replaced want information eliminating, which is what we generally called tax-control zero clearing chip. In reality, tax-control chip can be a writer single chip microcomputer, normally 89C51 is utilized.

Focus:

When it comes to tax-control information, the following item have to be focused on.

1.Before altering principal board, ask tax department to use card reader to record the fuel dispenser´s tax-control data.

2. When using single chip microcomputer, please according to the instruction strictly.

three. The primary board which is reset should be shift to current date and time if it really is used again.

4. When using a new primary board, be sure to let the tax department to initialize the fuel dispenser, or the tax function can not be employed.

How to maintain the fuel dispenser in daily life:

1. Keep the surface of the fuel dispenser clean and tidy at any time, including the shell, panel, show glass, hose, oil gun, and keyboard and etc.

two. Periodic cleaning of the filter net is necessary. Oil station can judge whether the filter net is still very clean, and then clean the filter net at regular intervals to prevent oil-way block. Normally, it should be cleaned about once a time. If it really is a newly- built oil station, it should be washed about once every one or two days for the there might be much dirt in the pipeline. If the oil flows out far more slowly, do clean it at any time.

three.The card of the fuel dispenser should be cleaned at regular intervals, in case of the dirt accumulation which will have effect on reading card.

4. Open the door plank at least once a week to check the operative mode of the fuel dispenser whether there is certainly oil leak or oil impregnate.

5. Check the Oil Dispenser Pump triangular belt once a week to judge whether it truly is too loose, too tight, or of abrasion. If the above situation appeared, to adjust or modify timely.

6. Oil gun is utilised most frequently, and it's easier to go wrong. Do to handle gently. Check whether there's oil leak on the oil gun; fasten the oil spearhead at regular time.

7. Handle the keyboard as gently as you can, do not press to hard on it and keep it clean.

8. Keep away from the refuel car grinding the refuel hose, in case of the steal line fraction, which will cause electrostatic spark.

9. Do more preparation on the rainy days or damp weather.( Gas Dispenser, Gas Pumps And Dispensers)