Consideration! Fuel Dispenser Repaired

Together with the improvement of fuel dispenser companies in china, it is hard to prevent fixing it. Normally speaking, if there is certainly anything incorrect with censtar Fuel Dispenser, it will present within the following aspect:

1. Accumulative figures transition appears.

2. Right after shift electrical energy, display panel on the fuel dispenser will not show.

three. It's going to show malfunction 3112 and so on. This type of malfunction is brought on by tax-control data, or maybe other factors. The only approach to resolve the problem would be to alter an additional new primary board, and also the main board which is replaced want data eliminating, that is what we generally named tax-control zero clearing chip. The truth is, tax-control chip is a writer single chip microcomputer, typically 89C51 is used.

Interest:

In relation to tax-control data, the following item has to be focused on.

1.Prior to changing principal board, ask tax division to work with card reader to record the fuel dispenser´s tax-control data.

2. When using single chip microcomputer, please according to the instruction strictly.

three. The primary board which can be reset should be shift to current date and time if it's utilised again.

4. When using a new principal board, be sure to let the tax department to initialize the fuel dispenser, or the tax function can not be employed.

How to maintain the fuel dispenser in daily life:

1. Keep the surface of the fuel dispenser clean and tidy at any time, including the shell, panel, show glass, hose, oil gun, and keyboard and etc.

2. Periodic cleaning of the filter net is necessary. Oil station can judge whether the filter net is still very clean, and then clean the filter net at regular intervals to avoid oil-way block. Normally, it should be cleaned about once a time. If it really is a newly- built oil station, it should be washed about once every one or two days for the there might be much dirt inside the pipeline. If the oil flows out far more slowly, do clean it at any time.

3.The card of the fuel dispenser should be cleaned at regular intervals, in case of the dirt accumulation which will have effect on reading card.

4. Open the door plank at least once a week to check the operative mode of the fuel dispenser whether there's oil leak or oil impregnate.

5. Check the Oil Dispenser Pump triangular belt once a week to judge whether it truly is too loose, too tight, or of abrasion. If the above situation appeared, to adjust or change timely.

6. Oil gun is utilized most frequently, and it really is easier to go wrong. Do to handle gently. Check whether there is certainly oil leak on the oil gun; fasten the oil spearhead at regular time.

7. Handle the keyboard as gently as you can, do not press to difficult on it and keep it clean.

8. Stay away from the refuel car grinding the refuel hose, in case of the steal line fraction, which will cause electrostatic spark.

9. Do more preparation on the rainy days or damp weather.( Gas Dispenser, Gas Pumps And Dispensers)