Focus! Fuel Dispenser Repaired

With the improvement of fuel dispenser producers in china, it truly is tough to avoid fixing it. Generally speaking, if there's anything wrong with censtar Fuel Dispenser, it's going to present within the following aspect:

1. Accumulative figures transition seems.

2. Following shift electrical energy, display panel around the fuel dispenser is not going to show.

three. It'll show malfunction 3112 and so on. This kind of malfunction is brought on by tax-control information, or maybe other reasons. The only method to solve the issue is to change one more new main board, and the primary board which is replaced need data eliminating, which is what we usually named tax-control zero clearing chip. Actually, tax-control chip is a writer single chip microcomputer, normally 89C51 is used.

Attention:

With regards to tax-control information, the following item should be focused on.

1.Ahead of changing main board, ask tax department to make use of card reader to record the fuel dispenser´s tax-control information.

two. When using single chip microcomputer, please according to the instruction strictly.

3. The principle board which can be reset should be shift to current date and time if it truly is used again.

4. When using a new principal board, be sure to let the tax department to initialize the fuel dispenser, or the tax function can not be utilised.

How to maintain the fuel dispenser in daily life:

1. Keep the surface of the fuel dispenser clean and tidy at any time, including the shell, panel, show glass, hose, oil gun, and keyboard and etc.

two. Periodic cleaning of the filter net is necessary. Oil station can judge whether the filter net is still very clean, and then clean the filter net at regular intervals to prevent oil-way block. Generally, it should be cleaned about once a time. If it is a newly- built oil station, it should be washed about once every one or two days for the there might be much dirt within the pipeline. If the oil flows out far more slowly, do clean it at any time.

3.The card of the fuel dispenser should be cleaned at regular intervals, in case of the dirt accumulation which will have effect on reading card.

4. Open the door plank at least once a week to check the operative mode of the fuel dispenser whether there is oil leak or oil impregnate.

5. Check the Oil Dispenser Pump triangular belt once a week to judge whether it is too loose, too tight, or of abrasion. If the above situation appeared, to adjust or adjust timely.

6. Oil gun is utilized most frequently, and it's easier to go incorrect. Do to handle gently. Check whether there is oil leak on the oil gun; fasten the oil spearhead at regular time.

7. Handle the keyboard as gently as you can, do not press to difficult on it and keep it clean.

8. Steer clear of the refuel car grinding the refuel hose, in case of the steal line fraction, which will cause electrostatic spark.

9. Do more preparation around the rainy days or damp weather.( Gas Dispenser, Gas Pumps And Dispensers)